Staining Adirondack Chairs
STAINING ADIRONDACK CHAIRS
Stains are the best way to go if you want easy to care for your Adirondack chairs and all wood patio furniture. The average stain can last anywhere from 1 to 7 years depending on the quality of the stain used, the number of coats applied, and the type of application. The big advantage to stain is that unlike paint, stain will not peel or bubble and gradually fades away over time. Thus it is simple to keep it looking new from one year to the next by applying a single fresh coat each spring or re-staining fully every 4 to 5 years as needed.
An additional coat of stain each spring takes only a few minutes of effort compared to the hours of labor that painting requires (sanding, priming, painting). For our cedar Adirondack chairs we recommend using Cetol 1 by Sikkens for the longest lasting finish but there are other good stains on the market today that have high UV protection ratings that can give you a wonderful finish if applied well.
Here are the basic instructions for staining your Adirondack chairs, just keep in mind that these are general rules only, they may not apply to the specific brand of stain you buy. Always read the labels and follow the paint manufacturer’s instructions for the best finish.
1. Partially disassemble your Adirondack chairs. You don't have to take the back slats or seat slats off - you simply want to have each piece accessible for staining as it is near to impossible to stain up and under the chairs while they are fully assembled without making a huge mess. Staining before you assemble your Adirondack chair is recommended.
2. Make sure all pieces of your Adirondack chair are all clean and dust free (if there are any scratches, lightly sand them smooth then clean off all dust before staining).
3. You can apply the stain by brush, sprayer, sponge or cloth - just keep in mind that sprayers will create over spray which on a windy day could end up staining your neighbor’s house/car/ dog/etc.
4. If using a brush apply a liberal coat of stain, then check for drips making sure they are wiped away before they dry. Do only one section at a time to assure consistency and a no drip finish.
4. Once completely dry sand lightly (with extra fine sandpaper; such as 320 grit)
Then vacuum any residual dust and it would be recommended to use a (tack cloth) to remove any small particles of dust. Then apply a thin second coat. (Again don't forget to check for drips since they detract from the beauty of a finished product.)
You can leave it with 2 coats or add a 3rd and 4th depending on how heavy a finish you want on your Adirondack chairs. The sanding between coats is what allows the stain to adhere to the wood, but it also provides an exceptionally smooth surface which creates a nice shine if you apply enough coats.
If you have any questions or need additional assistance please don't hesitate to call us toll free at the best Adirondack chair 1-800-418-1433.
Don't forget to email us your pictures! We love sharing photos of our happy customers enjoying their Adirondack chairs, swings and patio furniture.
|
|
|
|
|
 |
|
Other Tips:
Painting Adirondack Chairs
Caring for Cedar Adirondack chairs - unstained
Maintenance of your Treated Adirondack chairs
Adirondack chairs: before you buy
What's the difference between the Royal and Grand Adirondack Chair?
Staining Adirondack Chairs
|
